XHP5AH Battery for INFINIUM Omni Series Monitor 11.1V 55.5Wh New Original
The XHP5AH is designed for the INFINIUM Omni Series portable multi-parameter monitor, including models like the Omni M1 and Omni M3. It contains a genuine medical-grade rechargeable battery with a rated voltage of 11.1V, a typical capacity of 5.0Ah, and an energy density of 55.5Wh. This battery's primary function is to replace the original battery while providing stable power for mobile use.
| Product Name | Battery |
|---|---|
| Model | XHP5AH |
| Cell type | Lithium-ion |
| Compatible Model | Omni M1, Omni M3 |
| Voltage | 11.1V |
| Capacity | 5.0Ah |
| Energy | 55.5Wh |
| Charging time | Approximately 3-3.5 hours (using the original charger) |
| Operating Temperature Range | Charging: 0-45°C; Discharging: -10-50°C |
| Battery Life | More than 500 cycles |
| Size | 61mm × 124mm × 23mm |
| Weight | About 295g |
A1: It's best to suspend use and troubleshoot the issue before resuming. The message may indicate oxidized battery contacts or a malfunctioning communication chip. Seek professional assistance.
A2: This may occur when using a non-original charger with insufficient output current. If using an original charger, check the connector for foreign objects or looseness.
A3: First, allow the battery to drain naturally by using it until the monitor shuts down. Then fully charge it with the original charger. Repeat this process twice to restore capacity to over 85%. For long-term storage, charge to 60% monthly to prevent capacity degradation.