KEND A10 1.45V Hearing Zinc Air Battery Audiphones Betteries Disposable Battery
KEND A10 1.45V Hearing Zinc Air Battery Audiphones Betteries
► Brief Introduction
It is a widely compatible zinc-air button battery that can be used in different types of hearing aids, such as behind-the-ear BTE, in-the-ear ITE and ear canal RIC, etc., to provide long-lasting and stable power support for hearing aids. This battery type is a zinc-air battery. The working principle of the battery is a disposable battery (non-rechargeable) with metal zinc as the negative active material and oxygen in the air as the positive active material. When the battery seal sticker is torn off, oxygen enters the battery through the air diffusion layer and reacts with the metal zinc in the battery. The battery is activated and starts working. Therefore, the battery is sealed to ensure that air cannot enter. At the same time, the battery is ready to use after disassembly, which is very convenient.It is also very environmentally friendly. The battery does not contain harmful metals. The product of the reaction between metallic zinc and oxygen in the air is zinc oxide, which is also a non-toxic substance and can be recycled. The discharge rate of zinc-air batteries is mainly limited by the diffusion rate of oxygen, so the service life of batteries for different users will vary.
► Product features
1. Intelligent air activation
Using a special breathable film design, the battery can be quickly activated and used within 1-2 minutes after tearing off the seal
Air channel optimization to ensure the stability and continuity of the discharge process
2. Voltage stabilization technology
1.45V constant voltage output, fluctuation range ±0.05V
Specially optimized compatibility with digital hearing aids to reduce signal interference
3. Long-term endurance design
Using high-purity zinc raw materials, energy density is increased by 15%
Combined with multi-layer isolation technology to reduce self-discharge loss
4. Safety protection system
Four-fold safety protection: anti-leakage, anti-short circuit, anti-over-discharge, anti-reverse polarity
Special sealing process to prevent electrolyte leakage and corrosion of equipment
5. Environmental performance
Completely mercury-free formula, in line with the latest environmental standards
Recyclable design to reduce environmental burden
► Parameters
Product name |
Battery |
Cell type |
Zinc Air |
Model |
A10 |
Voltage |
1.45V ±0.05V |
Capacity |
105mAh |
Size |
Diameter 5.8mm × Height 3.6mm |
Storage life |
Unactivated for 3 years (sealed state) |
Discharge curve |
Stable type, 90% power range maintains 1.45V |
Packing |
6 pieces/row or 60 pieces/box(Moisture-proof sealed design) |
► Product Picture
► Notes on battery use
1. Battery activation
After tearing off the sticker, tap the battery on the table 2-3 times to help air enter the battery faster and react with the internal metal zinc powder
In winter, at low temperatures, the battery activation time will be extended to 3-5 minutes
2. Installation points
Confirm that the positive pole of the battery (the "+" logo side) is facing up
After inserting, press the battery lightly to ensure that the battery is in good contact with the battery compartment
3. Special situation handling
When used in a high humidity environment, to prevent the battery from being affected by moisture and affecting its service life, please use it with a moisture-proof sheet
When not in use for a long time, please remove the battery from the hearing aid and store it separately to prevent battery leakage
4. Performance optimization
When removing the battery at night, you can temporarily apply the original sticker
Regularly clean the battery compartment contacts (once a month)